| |
Enhanced photocatalytic activity of CdS nanostar decorated SiO2/TiO2 composite spheres and the simulation effect using FDTD model |
Ionics |
| |
Nanocubes phase adaptation of In2O3/TiO2 heterojunction photocatalysts for the dye degradation and tracing of adsorbed species during photo-oxidation of ethanol |
J TAIWAN INST CHEM E |
| |
Engineering S. oneidensis for Performance Improvement of Microbial Fuel Cell—a Mini Review |
Appl. Biochem. Biotechnol. |
| |
Ultrasonically modified P25-TiO2/In2O3 heterostructured nanoparticles: An efficient dual-responsive photocatalyst for solution and gas phase reactions |
J TAIWAN INST CHEM E |
| |
Anisotropic optical gains in a-plane ZnO/Zn0. 8Mg0. 2O multiple quantum wells grown via pulsed-laser deposition |
Appl. Surf. Sci. |
| |
Plasmonic metallic silver induced Bi2WO6/TiO2 ternary junction towards the photocatalytic, electrochemical OER/HER, antibacterial and sensing applications |
Appl. Surf. Sci. |
| |
Predictive modeling and simulation of wastewater treatment process using nano-based materials: Effect of pH and adsorbent dosage |
J. Mol. Liq. |
| |
The Computational Study of Moisture Effect on Mechanical Behaviour of Baghdadite Matrix via Molecular Dynamics Approach |
JMR&T. |
| |
Artificial intelligence simulation of Pb (II) and Cd (II) adsorption using a novel metal organic framework-based nanocomposite adsorbent |
J. Mol. Liq. |
| |
The novel composite membranes containing chloride and acid functionalized multiwall carbon nanotube fillers for gas separation |
Springer |
| |
Bio-derived catalysts: A current trend of catalysts used in biodiesel production |
Catalysts |
| |
Break Even Point Analysis of Liquefied Natural Gas Process and Optimization of its Refrigeration Cycles with Technical and Economic Considerations |
Pergamon |
| |
SARS-CoV-2 Spike Protein: Site-Specific Breakpoints for the Development of COVID-19 Vaccines |
J. King Saud Univ. Sci. |
| |
Synergistic improvements in the performance and stability of inverted planar MAPbI 3-based perovskite solar cells incorporating benzylammonium halide salt additives |
Mater. Chem. Front. |
| |
Realizing Stable High‐Performance and Low‐Energy‐Loss Ternary Photovoltaics through Judicious Selection of the Third Component |
Solar RRL |
| |
The influence of hydrostatic pressure and annealing conditions on the magnetostructural transitions in MnCoGe |
J. Appl. Phys. |
| |
Tin oxide for optoelectronic, photovoltaic and energy storage devices: a review |
J. Mater. Chem. A |
| |
Room-Temperature Synthesis of Air-Stable Near-Infrared Emission in FAPbI3 Nanoparticles Embedded in Silica |
Biosensors |
| |
Facile room-temperature synthesis of highly air‐stable and moisture-resistant CsPbX3/SiO2 nanocomposites for tunable white light-emitting diodes |
Pergamon |
| |
Enhancing the signal contrast ratio and stability of liquid crystal-based sensors by using fine grids made by photolithography of photoresists |
Analyst |
| |
Polytriphenylamine and Poly(styrene-co-hydroxystyrene) Blends as High-Performance Anticorrosion Coating for Iron |
Polymers |
| |
Enhanced N₂ affinity of 1T-MoS₂ with a unique pseudo-six-membered ring consisting of N–Li–S–Mo–S–Mo for high ambient ammonia electrosynthesis performance |
J. Mater. Chem. A |
| |
D–A–π–A organic sensitizer surface passivation for efficient and stable perovskite solar cells |
J. Mater. Chem. A |
| |
[2.2] Paracyclophane-based hole-transporting materials for perovskite solar cells |
J. Power Sources |
| |
Electrocatalytic Reduction of NO3– to Ultrapure Ammonia on {200} Facet Dominant Cu Nanodendrites with High Conversion Faradaic Efficiency |
J. Phys. Chem. Lett. |
| |
Synthesis of rod‐shaped dipolar compounds for the study of long‐range electronic interactions |
JCCS. |
| |
Polycyclic Arenes Dihydrodinaphthopentacene‐based Hole‐Transporting Materials for Perovskite Solar Cells Application |
Chemistry |
| |
Spiro‐sulfone‐based Auxiliary Acceptor in D‐A‐π‐A Dye‐sensitized Solar Cells Application under Indoor/Outdoor Light |
Asian J. Org. Chem. |
| |
p-Tetrafluorophenylene Divinylene-Bridged Nonfullerene Acceptors as Binary Components or Additives for High-Efficiency Organic Solar Cells |
ACS Appl. Mater. |
| |
Solution-processed light-emitting devices |
Chemical Solution Synthesis for Materials Design and Thin Film Device Applications
|
| |
Solution-processed photodetectors |
Chemical Solution Synthesis for Materials Design and Thin Film Device Applications |
| |
Single molecular nanomedicine with NIR light-initiated superoxide radical, singlet oxygen and thermal generation for hypoxia-overcoming cancer therapy |
Nanoscale |
| |
Substitution effect on carbazole-centered donors for tuning exciplex systems as cohost for highly efficient yellow and red OLEDs |
Mater. Chem. Front. |
| |
Origin of Hole Transport in Small Molecule Dilute Donor Solar Cells |
Advanced Energy and Sustainability Research |
| |
New carboline-based donors for green exciplex-forming systems |
JCCS |
| |
Small Molecules for Vacuum-Processed Organic Photovoltaics: Past, Current Status, and Prospect |
CSJ |
| |
Energy levels in dilute-donor organic solar cell photocurrent generation: A thienothiophene donor molecule study |
Org. Electron. |
| |
Organic Lead Halide Nanocrystals Providing an Ultra-Wide Color Gamut with Almost-Unity Photoluminescence Quantum Yield |
ACS Appl. Mater. |
| |
Novel thieno[3,2-b]thiophene-embedded small-molecule donors for highly efficient and photostable vacuum-processed organic photovoltaics |
Mater. Today Energy |
| |
Reversible Fluorescence Switching of Donor–Acceptor Type Bipyridines by Simple Protonation–Deprotonation Equilibria |
CSIRO |
| |
Transparent organic upconversion device targeting high- grade infrared visual image |
Nano Energy |
| |
Harnessing the Inductive Effect To Design New Donor–Acceptor–Acceptor′-Configured Small-Molecule Donors for Vacuum-Processed Organic Photovoltaics |
Energy Fuels |
| |
Synergistic Dual-Atom Molecular Catalyst Derived from Low-Temperature Pyrolyzed Heterobimetallic Macrocycle-N4 Corrole Complex for Oxygen Reduction |
Small |
| |
Fabrication of Non-Uniform Nanolattices with Spatially Varying Geometry and Material Composition |
Adv. Mater. Interfaces |
| |
Diagnosis of tuberculosis pleurisy with three endoscopic features via pleuroscopy |
SAGE |
| |
First report of an adult female patient with endobronchial inflammatory myofibroblastic tumor in Taiwan: A case report |
Thorac. Cancer |
| |
Controlling through-space and through-bond intramolecular charge transfer in bridged D–D′–A TADF emitters |
J. Mater. Chem. C |
| |
Novel scattering and color converting substrates for simple-structured white organic light-emitting diodes |
Org. Electron. |
| |
Carbazole/triphenylamine-cyanobenzimidazole hybrid bipolar host materials for green phosphorescent organic light-emitting diodes |
Org. Electron. |
| |
Extracorporeal Membrane Oxygenation for Severe Acute Respiratory Distress Syndrome: Propensity Score Matching |
Membranes |
| |
Templated Assembly of Nanoparticles into Continuous Arrays |
Langmuir |
| |
Light extraction in tandem organic light emitting diodes |
Appl. Phys. Lett. |
| |
Carbazole-pyridine pyrroloquinoxaline/benzothiadiazine 1,1-dioxide based bipolar hosts for efficient red PhOLEDs |
Org. Electron. |
| |
Flexible light-emitting electrochemical cells on muscovite mica substrates |
Org. Electron. |
| |
Dicyano-Imidazole: A Facile Generation of Pure Blue TADF Materials for OLEDs |
Chemistry A European Journal |
| |
Design and Synthesis of Novel Phenothiazine-Benzothiadiazine-1,1-dioxide Hybrid Organic Material for OLED Applications |
ChemistrySelect |
| |
Cover Feature: Dicyano-Imidazole: A Facile Generation of Pure Blue TADF Materials for OLEDs |
Chemistry A European Journal |
| |
A Method to Realize Efficient Deep-Red Phosphorescent OLEDs with a Broad Spectral Profile and Low Operating Voltages |
Materials |
| |
Mechanical power during extracorporeal membrane oxygenation and hospital mortality in patients with acute respiratory distress syndrome |
Critical Care |
| |
A micro-cavity forming electrode with high thermal stability for semi-transparent colorful organic photovoltaics exceeding 13% power conversion efficiency |
Nano Energy |
| |
A Ratiometric Optical Dual Sensor for the Simultaneous Detection of Oxygen and Carbon Dioxide |
Sensors |
| |
Evaluating the Optimal Capacity for the Implementation of Fluidized Catalytic Cracking in the Refinery by the Technical and Economic Analysis |
Petroleum Chemistry |
| |
The technical and economic comparison of ethylene production from natural gas and ethane |
INT J CHEM REACT ENG |
| |
Surface engineered iron oxide nanoparticles as efficient materials for antibiofilm application |
Appl. biochem. biotechnol. |
| |
Technical, economic and thermodynamic analysis for loading, storing, unloading and transporting of Ethane fluid |
J TAIWAN INST CHEM E |
| |
Controlling Ni2+ from the Surface to the Bulk by a New Cathode Electrolyte Interphase Formation on a Ni-Rich Layered Cathode in High-Safe and High-Energy-Density Lithium-Ion Batteries |
ACS Appl. Mater. Interfaces |
| |
Better efficiency for the olefin plant demethanizer tower by replacing trays with packing |
De Gruyter |
| |
An Overview of Biodiesel Production via Calcium Oxide Based Catalysts: Current State and Perspective |
Energies |
| |
Optimization of aqueous enzyme-assisted extraction of rosmarinic acid from rosemary (Rosmarinus officinalis L.) leaves and the antioxidant activity of the extract |
J. food process. preserv. |
| |
The effect of shear rate on aggregation and breakage of asphaltenes flocs: Experimental study and model-based analysis |
J. Mol. Liq. |
| |
Sol-gel synthesized lithium orthosilicate as a reusable solid catalyst for biodiesel production |
Int. J. Energy Res. |
| |
Improving the gasoline properties by blending butanol-Al2O3 to optimize the engine performance and reduce air pollution |
Energy |
| |
Synthesis, characteristics, and electrochemical performance of N,N-(p-phenylene)bismaleamate and its fluorosubstitution compound on organic anode materials in lithium-ion batteries |
Electrochim. |
| |
Transparent and Flexible Inorganic Perovskite Photonic Artificial Synapses with Dual-Mode Operation |
Adv. Funct. Mater. |
| |
Highly crystalline colloidal nickel oxide hole transport layer for low-temperature processable perovskite solar cell |
Chem. Eng. J. |
| |
Polymeric Hole Transport Materials for Red CsPbI3 Perovskite Quantum-Dot Light-Emitting Diodes |
Polymers |
| |
Encapsulation improvement and stability of ambient roll-to-roll slot-die-coated organic photovoltaic modules |
Solar Energy |
| |
Benzo[ghi]perylenetriimide derivatives as effective interfacial passivation and electron transporting layers for inverted perovskite solar cells |
Dyes and Pigments |
| |
Enhancing charge transport performance of perovskite solar cells by using reduced graphene oxide-cysteine/nanogold hybrid material in the active layer |
FlatChem |
| |
Greater miscibility and energy level alignment of conjugated polymers enhance the optoelectronic properties of ternary blend films in organic photovoltaics |
Dyes and Pigments |
| |
High-performance Li-Ion capacitor constructed from biomass-derived porous carbon and high-rate Li4Ti5O12 |
Appl. Surf. Sci. |
| |
Spherical Hole-Transporting Interfacial Layer Passivated Defect for Inverted NiOx-Based Planar Perovskite Solar Cells with High Efficiency of over 20% |
ACS Appl. Mater. Interfaces |
| |
Small Molecules with Controllable Molecular Weights Passivate Surface Defects in Air-Stable p-i-n Perovskite Solar Cells |
Adv. Electron. Mater. |
| |
Co2+-Doped BiOBrxCl1-x hierarchical microspheres display enhanced visible-light photocatalytic performance in the degradation of rhodamine B and antibiotics and the inactivation of E. coli |
J. Hazard. Mater. |
| |
Indacenodithiophene-based N-type conjugated polymers provide highly thermally stable ternary organic photovoltaics displaying a performance of 17.5% |
J. Mater. Chem. A |
| |
Improved Blend Film Morphology and Free Carrier Generation Provide a High-Performance Ternary Polymer Solar Cell |
ACS Appl. Mater. Interfaces |
| |
Facile star-shaped tetraphenylethylene-based molecules with fused ring-terminated diarylamine as interfacial hole transporting materials for inverted perovskite solar cells |
Mater. Chem. Front. |
| |
Thermally Activated Delayed Fluorescence in Commercially Available Materials for Solution-Process Exciplex OLEDs |
Polymers |
| |
Investigation of random lasing from all-inorganic halide perovskite quantum dots prepared under ambient conditions |
Nanoscale |
| |
Controllable crystallization based on the aromatic ammonium additive for efficiently near-infrared perovskite light-emitting diodes |
Org. Electron. |
| |
Transparent photodetectors with ultra-low dark current and high photoresponse for near-infrared detection |
Org. Electron. |
| |
The effect of ZnO preparation on the performance of inverted polymer solar cells under one sun and indoor light |
J Mater Chem C |
| |
Realizing a colorful polymer solar cell with high color purity via a metal alloy-dielectric–metal alloy electrode |
J Mater Chem C |
| |
Structural effect of phenylcarbazole-based molecules on the exciplex-forming co-host system to achieve highly efficient phosphorescent OLEDs with low efficiency roll-off |
J Mater Chem C |
| |
Efficient Plastic Recycling and Remolding Circular Economy Using the Technology of Trust–Blockchain |
Sustainability |
| |
Resolving Cross-Sensitivity Effect in Fluorescence Quenching for Simultaneously Sensing Oxygen and Ammonia Concentrations by an Optical Dual Gas Sensor |
Sensors |
| |
AAAyl-Phenylcarbazole-Based Host Materials and Their Use for Co-host Designs in Phosphorescent OLEDs |
Chemistry |
